UTE 2800-R-RAL9010-G-55
Flush-mounted room controller, RAL9010 glossy 55x55, 5-30°C, AC 230V, 16A relay output 1 NO contact, PWM / 2-point control, switch, TA, LED displays
| Article number | 547816054502 |
|---|---|
| Contact | Heating |
| Voltage | 230V AC 50/60 Hz |
| Switching current | 16 (4) A |
| Colour | polar white (similar to RAL 9010) |
| Temperature range | 5 … 30°C |
| Measurements | 55 x 55 mm |
| Technology | Electronic |
| Temperaturedrop | |
| Surface | glossy |
| Control procedure | PWM / ON/OFF (adjustable) |
| Display | No |
| Programmable | Yes |
| Remote sensor | not possible |
| Switch | |
| LED | Heating / temperature setback |
| Frame |
Electronic flush-mounted thermostat is suitable for controlling electric heaters, heat/circulation pumps etc.. Control or monitoring of temperatures in living rooms, offices and hotels. Suitable for all standard switch ranges. Polar white glossy, 55x55 cover with knob. Various parameters can be set on the device: Temperature reduction, current and control algorithm (pulse width modulation or 2-point control). When the clock terminal is switched on, the temperature is regulated to a lower temperature (adjustable 3.5C / 6C / 9C). With LED status indicators. Mains switch (on/off) can be operated via setting wheel. Adjustable range narrowing in the setting knob as a heating cost brake. A captive screw with threaded insert for fastening the housing cover and practical plug-in terminals make installation easier. Installation in 55 mm flush-mounted box.
EV 230V, 6 channel terminal strip
